FENTON Black soft x Light black PREMIUM LENS (semi-permanent anti-fog treatment/polarized lens/blue light cut/hard coat included) [vidg00430-fbk] 送料無料

[FENTON]
This round frame model is named after the street in the town where Chris Beresford, the owner and support rider of Dang Shades, spent his early teenage years. It is suitable for street use as well as active situations, and can be used by both men and women. The "DANG" logo on the temple is embedded in a metal logo.
Original neoprene case included.

[PREMIUM LENS]
This product uses special lenses that have an invisible special embossing on the inside of the lens, and have a semi-permanent anti-fog effect that lasts regardless of how many times you wipe the lens, and have also passed JIS standard testing.
(However, in extremely cold regions, steam that cannot be handled during processing may turn into water droplets, which may then freeze.)

<Lens specifications>
- Visible light transmittance: Approximately 34%
・Polarization rate: 99%
・Semi-permanent anti-fog coating ・65% blue light cut ・Scratch resistant! Hard coat included (outer lens surface)
・Two lenses ・UV protection of over 99% ・Made in Japan (Sabae, Fukui Prefecture)

＜Notes＞

* The TAC (triacetate) polarized lenses used in Premier Lenses are constructed with a special polarized filter sandwiched between two lenses.

Therefore, they are vulnerable to water and sweat, and if they are stored while wet, moisture will penetrate between the film, causing the lens to fade and the polarizing film to peel off.

If the glasses get wet from rain or sweat, first remove the moisture by pressing them with tissue or similar. If you wipe them as you normally would, they may get scratched or the moisture may spread horizontally, making them even more difficult to remove. After removing the moisture, if there is any dirt, gently wipe them off with a soft cloth made of material specifically made for cleaning glasses, or a slightly damp soft cloth. Avoid wiping with a hard, dry, or dirty cloth, and avoid wiping too hard.

Do not soak in water or leave in a wet state for a long period of time. Also, refrain from using an ultrasonic cleaner.

* The outside of the lens is hard-coated, but the inside does not have a hard coating due to its anti-fog finish, so it is prone to scratches, so please be careful when handling it.

* Heat can cause deterioration. Do not leave it in the car. Do not expose it to hot water. Also, do not use a hair dryer to dry it if it gets wet.